220V Woodworking Portable Edge Banding Machine Adjustable Temperature Wood PVC Manual Edge Bander For Self-adhesive Edge Banding

Note: The machine is only suitable for the edge banding strip with adhesive backing, and cannot be used in the edge banding strip without adhesive backing

How to use the machine:

1. Power on, the red indicator light is on

2. Rotate the temperature adjustment switch to the maximum, the green indicator light is on, and the heating for 10s-20s can start to work.

3. If the novice or the strength is not well controlled, it is recommended to add a few drops of high-temperature lubricating oil, without adding too much. The function can lubricate and prevent viscose, and pay attention to preventing burns (we do not match this lubricating oil, because it cannot be transported, customers need to buy it themselves)

4. Put the caliper down, adjust the width well, not too tight

5. First heat and position one end of the edge banding strip, then jam the edge banding strip and heat it again. Slow down and position the strip.

6. Put away the caliper and gently heat it back and forth several times, depending on the specific situation

7. Squeeze back and forth with the pressure wheel at the back of the machine to help fix it.

Description: Since some customers cannot control the force of
pressing the edge banding strip, the edge banding strip is damaged. We changed the pressure wheel from iron to rubber material.